成人做爰免费视频免费看_成人a级高清视频在线观看,成人a大片在线观看,成人a大片高清在线观看,成人av在线播放,一a一级片,一级黄 中国色 片,一级黄 色蝶 片,一级黄色 片生活片

上海譽星電子有限公司

ITW Chemtronics CW2200STP CW2200MTP 導電筆檢測報告

時間:2012-10-12閱讀:2764
分享:

美國 ITW Chemtronics 導電筆

CW2200STP 標準頭 直徑1.2mm   8.5g   0.32 oz

CW2200MTP 微型頭 直徑0.8mm  8.5g   0.32 oz

能地劃出高導電性地銀線路,跳線:
·快速創建導電的銀線路
·操作簡單
·可在低溫下焊接
·室溫下幾分鐘可干
·可選擇微型筆頭(用于細線)或標準筆頭(較粗的線)

應用:
·修補線路
·連接元件
·制作光滑的跨接線
·屏蔽電子裝置
TDS # CW2200
PRODUCT DESCRIPTION
CircuitWorks® Conductive Pen makes instant highly conductive silver traces on circuit boards. CW2200 is used in prototype, rework, and repair of circuit boards by linking components, repairing defective traces, and making smooth jumpers. The silver traces dry in minutes and have excellent adhesion to most electronic materials. Engineers, repair technicians, and manufacturers will find that the CircuitWorks® Conductive Pen speeds project completion and cuts rework time.
?? Single component system
?? High electrical conductivity
?? Fast drying
?? Highly adherent to circuit boards
?? Operating temperature to 400°F (205°C)
TYPICAL APPLICATIONS
CircuitWorks® Conductive Pen may be used for electronics applications including:
?? Circuit Trace Repair
?? Solderless Linking of Components
?? EMI Shielding
?? Solderable Terminations
?? Quick Prototype Modifications
CHEMTRONICS®
Technical Data Sheet
CircuitWorks® Conductive Pen
TYPICAL PRODUCT DATA AND PHYSICAL PROPERTIES
Composition
Material Silver Filled Polymer
Silver Particle Size
10-15 microns
Color
Silver Gray
Setting Rate
<2mm/hr.
Properties
Conductivity 0.02-0.05 ohms/sq/mil
0.00005-0.000125 ohm cm
Max. Temperature 400°F (205°C)
Tack-Free Time @ 25°C 3 to 5 Minutes
Cure Time @ 25°C 20 to 30 Minutes
Solder Wetting 2 to 3 Seconds
Electrical Conductivity Excellent
Adhesion Excellent
Flexibility Good
Chemical Resistance Good
Tip Diameters
MTP 0.8 mm (0.03 inches)
STP 1.2 mm (0.05 inches)
Shelflife 12 months
COMPATIBILITY
CircuitWorks® Conductive Pen material has excellent compatibility with materials used in printed circuit board fabrication. As with any chemical system, compatibility with the substrate must be determined on a non-critical area prior to use.
USAGE INSTRUCTIONS
Read MSDS carefully prior to use.
Cleaning: For best adhesion, clean board with one of Chemtronics Electro-Wash® or Pow-R-Wash® solvents in order to remove any surface contamination which may prevent adequate material contact.
Mixing: Although this system has been formulated to resist hard-packing, it should be shaken vigorously for 30 seconds to insure the proper dispersion of the silver flakes. If pen has been allowed to sit idle for a long period of time, the mixing ball may seize in the barrel. To free the ball use force to tap the barrel end of the pen until the ball begins to move inside the pen.
Application: The conductive ink is dispensed through the CircuitWorks® Conductive Pen. Squeezing the pen body while pressing down on the surface will allow the material to flow, enabling the trace to be drawn. Practice with the pen before attempting detail work. The bulk form of this material may be applied by brushing, banding, or automatic dispensing equipment.
Thinning: The conductive ink has been optimized for the CircuitWorks® Conductive Pen and thinning is not normally necessary. However, Butyl Acetate may be added with thorough mixing to make slight adjustments for ease of application in the bulk form.
Clean-up/Removal: The conductive ink may be cleaned or removed using a strong organic solvent such as Chemtronics® Electro-Wash® PX.
Curing: Tack-free in 3 to 5 minutes at room temperature. Achieves electrical conductivity within 30 minutes. Heat cure for 5 minutes at 250 to 300°F (120 to 150°C) for maximum conductivity, durability and chemical resistance.
Soldering: Low temperature soldering is possible to the heat-cured silver conductive traces if done at 350°F (177°C) for <5 seconds.
AVAILABILITY
CW2200STP 8.5 g (0.3 oz.), Standard 1.2 mm tip
CW2200MTP 8.5g (0.3 oz.), MicroTip 0.8 mm tip
TECHNICAL & APPLICATION ASSISTANCE
Chemtronics® provides a technical hotline to answer your technical and application related questions. The toll free number is: 1-800-TECH-401.
NOTE:
This information is believed to be accurate. It is intended for professional end users having the skills to evaluate and use the data properly. ITW CHEMTRONICS® does not guarantee the accuracy of the data and assumes no liability in connection with damages incurred while using it.
MANUFACTURED BY:
ITW CHEMTRONICS®
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. F (06/09)
DISTRIBUTED BY:
 

會員登錄

×

請輸入賬號

請輸入密碼

=

請輸驗證碼

收藏該商鋪

X
該信息已收藏!
標簽:
保存成功

(空格分隔,最多3個,單個標簽最多10個字符)

常用:

提示

X
您的留言已提交成功!我們將在第一時間回復您~

以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,化工儀器網對此不承擔任何保證責任。

溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。

撥打電話
在線留言
主站蜘蛛池模板: 欧美日韩国产免费看| 国产精品久久久久久久精| 纯肉攻让受含着边走| 日产乱码一二三区别视频| 久久久久久久久久77777| 色综合亚洲色综合久久网张柏芝| 中文字幕色偷偷人妻久久| 无遮挡国产高潮视频免费观看| 黄乱色伦短篇小说h| 免费一级特黄欧美大片久久网| 免费看国产精品麻豆| 五月色综合无码一区二区三区| 欧美人妻精品一区二区三区| 日韩欧美一区二区三区在线视频| 91人妻中文字幕在线精品| 久久久无码精品亚洲A片0000| 亚洲精品久久无码一区二| 亚洲欧美中文日韩电影| 亚洲午夜精品A片久久WWW软件| 亚洲人成人网毛片在线播放| 成人免费看片又大又黄| 日韩欧美国产色| 国产亚洲欧美日韩久久| 欧美一区二区三区18禁| 日韩国产精品一区二区| 亚洲女人天堂av| 国产精品久久久久久久久影视| 国内精品久久毛片一区二区| 无敌神马影视影院在线| 制服丝袜中文字幕在线| 亚洲国产欧美国产第一区| 韩国电影《年轻的妈妈》| 亚洲欧洲日产国无高清码图片| 欧美日韩在线成人| 18禁欧美精品久久久久久| 国产精品18久久久| 麻豆国产精品久久人妻| 国产精品毛片久久久久久| 91热久久免费频精品99欧美| 夜夜嗨久久久精品一区| 欧美日韩一区二区三区精品|