您好, 歡迎來到化工儀器網
使用低溫試驗箱要避免的七大誤區
使用低溫試驗箱要避免的七大誤區
由于環境以及人員誤使用的原因，低溫試驗箱也會常常耍耍脾氣，甚至會造成操作人員的人身安生及物品的財產安全。下面系數低溫試驗箱要避免的七大誤區：
Due to misuse the environment and people, low temperature test box will often get into a huff, and even cause personal safety and manipulation of objects in person and property safety. Seven misunderstandings of low temperature test box below coefficient to avoid:
一、低溫試驗箱電源為三相五線制，為確保設備及人身安全，請按我司規范要求供給電源并可靠接地；
Test is strictly prohibited to place inflammable and explosive products two, equipment in the working area, the specific material please view;
二、設備工作區內嚴禁放置易燃易爆的產品進行測試，具體物質請詳細查看說明書；
Three, if the test workpiece external power supply is needed, please use the external power supply, do not use the equipment itself power;
三、如果試驗工件需外接電源，請使用外加電源，不要直接使用低溫試驗箱本身電源；
Four, the test temperature 55 ℃, do not open the refrigerator, which can prolong the service life of the compressor;
四、試驗溫度55℃時，請勿打開制冷，可延長壓縮機的使用壽命；
Four, the test temperature 55 ℃, do not open the refrigerator, which can prolong the service life of the compressor;
五、切忌勿重力開啟閉合低溫試驗箱箱門，長期如此會導致箱門脫落；
Five, avoid by all means is not gravity opening closing low temperature test box door, so long will cause the door off;
六、低溫試驗箱長時間不使用時，應定期做驅除潮氣處理，避免損壞電器元器件等；
Do not use the equipment six, long time, should be regularly do get rid of moisture treatment, avoid damage to electrical components etc.;
七、試驗過程中除非必要請勿打開箱門，否則可能會造成人身安全；
Seven, in the process of test unless necessary, do not open the door, otherwise it may cause personal safety;