化工儀器網
技術文章
Nanobrook Omni測量應用案例-87
閱讀：424 發布時間：2019-3-6
作者：Zu-Jin Lin*†‡ , He-Qi Zheng†, Huan-Yu Zheng†, Li-Ping Lin†, Qin Xin†, and Rong Cao‡
† Department of Applied Chemistry, College of Life Science, Fujian Agriculture and Forestry University, Fuzhou, Fujian 350002, P. R. China
‡ State Key Laboratory of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, Fujian 350002, P. R. China
摘要：Highly efficient decontamination of heavily toxic Cr2O72– from water remains a serious task for public health and ecosystem protection. An easily regenerative and reused sorbent with suitable porosity may address this task. Herein, a series of water-stable and ecofriendly metal–organic frameworks (MOFs) with large surface areas were assessed for their ability to adsorb and separate Cr2O72– from aqueous solutions. Among these tested MOFs, NU-1000 shows an extraordinary capability to efficiently capture (within 3 min) Cr2O72– with a sorption capacity of up to 76.8 mg/g, which is the largest one for the neutral MOF-based Cr2O72– sorbents. NU-1000 also shows remarkable selectivity for Cr2O72– capture and can effectively reduce the Cr(VI) concentration from 24 ppm to 60 ppb, which is below the acceptable limit for the drinking water standard (100 ppb by the U.S. Environmental Protection Agency). Moreover, this adsorbent can be easily regenerated by Soxhlet extraction with an acidic methanol solution (2.5 M HCl) and can be reused at least three times without a significant loss of it adsorption ability. More intriguingly, NU-1000 can also serve as an efficient photoluminescent probe for the selective detection of Cr2O72– in aqueous media. The Cr2O72– detection limit is as low as 1.8 μM, and the linear range is from 1.8 to 340 μM. Our work shows that NU-1000 is a unique material combining both efficient sorption and exceptional fluorescent sensing of Cr2O72– in aqueous media.