FRT1000 機械診斷演示轉子套件 Machinery Diagnostic Demonstration Rotor Kits

VALENIAN-FRT1000 轉子套件是作為真實機器的小型工作示例開發的，可在真實情況下模擬振動信號。短（單臨界）和長（雙臨界）轉子套件均可供選擇。可以安裝各種傳感器來提供振動信號。這些信號可用于培訓振動分析師或維護人員對實際振動傳感器系統或振動信號進行故障排除。

使用套筒式軸承的轉子套件主要使用基于時間的分析技術進行研究，例如時間波形、軌道和軸位置繪圖、相位和模態形狀分析。使用可選的滾珠軸承，FFT 型儀器可用于研究軸承產生的頻率。

使用轉子套件可以獲取和研究各種測量值：

- 基于頻率的信號

- 基于時間的信號

- 軌道分析

- 平衡

- 跳動

- 轉子彎曲

- 識別轉子臨界速度

- 軸相對信號

- 共振振幅因子

- 轉子動態研究

- 相位信號

The VALENIAN-FRT1000 Rotor Kits were developed as a small working example of a real machine where vibration signals may be simulated under realistic circumstances. Both short (single critical) and long based (two criticals) rotor kits are available as an option. A variety of transducers may be installed to provide vibration signals. These signals may be used to train vibration analysts or maintenance personnel to troubleshoot actual vibration transducer systems or vibration signals.

The Rotor Kit using sleeve type bearings is primarily studied using Time Based analysis techniques such as time waveforms, orbits, and shaft position plotting, phase, and mode shape analysis. With the optional ball bearing, a FFT type instrument is useful to study the frequencies generated by the bearing.

A variety of measurements may be obtained and studied using the Rotor Kit:

- Frequency Based Signals

- Time Based Signals

- Orbital Analysis

- Balancing

- Runout

- Rotor Bow

- Identify Rotor Critical Speeds

- Shaft Relative Signals

- Resonance Amplitude Factor

- Rotor Dynamic Studies

- Phase Signals