9
SKC鋁制旋風采樣器
SKC Aluminum Cyclone· ACGIH,NIOSH,ISO,CEN 等機構共同認定可呼吸性粉塵的采樣效率標準曲線: D50=4.0μm，在2.5 liters/min美國NIOSH Mechod 0600可呼吸性粉塵分析方法，NIOSH Mechod7500二氧化硅分析方法:采用D50=4.0μm的定義。
美國SKC鋁制旋風采樣器訂貨號：
(1) 225-01-02 | 旋風分離管,鋁質,37mm |
(2) 225-01-01 | 旋風分離管,鋁質,25mm |
(3) 225-01-03 | 鋁質校正腔（Calibration Chamber），適用于37mm或25mm兩種鋁質旋風分離管 |
(4) 225-1 | 濾紙匣固定夾（Filter Cassette Holder），可支持37mm或25mm三節式濾紙匣與旋風分離管裝置，附有衣領夾 |
(5) P225011 | 備用分離管底蓋(ReplacementGrit Pot)，紅色，每盒25個 |
SKC鋁制旋風采樣器特點：
滿足ACGIH/ISO/CEN呼吸曲線
消除不利的靜電影響
小型、輕質
規定NIOSH7500游離二氧化硅分析方法；NIOSH 0600可呼吸性粉塵分析方法
使用開式三節式濾料收集器，能夠使更多的均勻粒子
The cyclone sampler is designed for dust (aerosol) sampling to the respirable convention as defined in standard EN481:1993, using HSE method MDHS 14/3 “General methods for sampling and gravimetric analysis of respirable and inhalable dust”.
Design flow rate is 2.2 l/min, giving a 50% sampling efficiency (cut point) at 4.0μm (micron) particle size.
The SKC plastic cyclone is manufactured from conductive plastic which dissipates electrical charges to the surrounding atmosphere and prevents static interference on the collection of the dust particles.
The filter is held within a re-usable plastic cassette, which is supplied complete with a metal filter support grid and a sealing clip to prevent contamination of the sample during transport for laboratory analysis.
For detailed instructions on air sampling in general and use of the cyclone sampler in particular refer to SKC’s 224-G1 Step by Step Guide to Air Sampling.