您好, 歡迎來到化工儀器網
美國進口精密調壓閥減壓閥
330/340型儀表空氣過濾調壓閥
700型精密高流量調壓閥
700BP型精密背壓調壓閥
背壓調節閥閥前端壓力達到設定壓力后，
產品簡介
詳細介紹
美國進口精密調壓閥減壓閥
330/340型儀表空氣過濾調壓閥
Type 300 Instrument Air Filter Regulator Series
700型精密高流量調壓閥
Type 700 High Flow Pressure Regulator
700BP型精密背壓調壓閥
Type 700BP Precision Back Pressure Regulator
背壓調節閥閥前端壓力達到設定壓力后，背壓閥打開，使背壓閥前端的壓力保持在恒定的設定壓力，且不受背壓閥出口壓力的影響。
美國進口精密調壓閥減壓閥
產品說明
The Type-700BP Back Pressure Regulator is a high flow, highly accurate pneumatic relief valve with an adjustable set point. It'sprimary function is to provide protection against over pressurization in the downstream portion of a pneumatic system. This precision unit is capable of handling flows up to 50 SCFM. A rolling diaphragm provides the sensitivity that causes the Type-700BP to vent to atmosphere in response to the slightest upstream changes. FEATURES • SENSITIVITY - Provides quick response to controlled system pressure variation. • HIGH FLOW CAPACITY - Flows up to 50 SCFM (depending on set point pressure and port size). • COMPENSATING FLOW CONTROL - Venturi type velocitypressure tube adjusts main control valve opening in accordance with velocity pressure variations of flow from controlled system. • ON-LINE MAINTENANCE - Unit can be disassembled and serviced without removing from the air line. APPLICATIONS The Type-700BP is used in place of a standard relief valve to provide protection against excessive build-up in supply pressure lines to instruments and other sensitive control devices. The most common application is to control the air pressure in a system supplied by a compressor. Used in conjunction with a diaphragm operated inlet restricting valve and a bleed orifice, the Back Pressure regulator relieves excess compressor pressure while activating the intake restricting valve. When the regulator shuts off, the down-stream air vents through the bleed orifice allowing the restricting valve to open.
美國進口精密調壓閥減壓閥
700BP系列產品簡介：
精密背壓式調壓閥700BP是一種高流量、高精度氣動安全閥，設定點可調。它的基本功能是對氣動系統的下游壓力進行過壓保護,該減壓閥流量處理能力高達50SCFM。上游微小的壓力變化滾動隔膜的靈敏度會引起該減壓閥向大氣中排放。
產品特點：
文氏對控制系統壓力變化反應迅速
大流量：流量高達50 SCFM (依設定點壓力和接口尺寸而定)
流量補償控制：文氏流速壓力管根據控制系統流量流速壓力變化調節主控閥開啟進行流量補償
在線維護：不用拆卸供氣管線就可方便維護
應用：
適用于供壓管線到儀表和其它靈敏控制儀中的過壓保護。zui普通的應用是空壓機供壓系統中的介質壓力控制。用隔膜式入口節流閥和排氣孔，背壓減壓閥釋放過多的空壓機壓力，同時關閉入口節流閥。當背壓減壓閥關閉時，下游介質通過排放孔釋放并開啟該節流閥。
技術參數
| 型號 | TYPE 700BP |
zui大流量 | 80 SCFM (85 m3/小時) 根據設定點壓力和接口尺寸而定 |
靈敏度 | 1/8〞(3.2mm)水柱 |
zui大供壓 | 250 PSIG (1750Kpa) |
工藝連接尺寸 | 1/4〞NPT; 1/2〞NPT; 3/8〞NPT |
材質 | 鑄合金鋁外加烤瓷 |
耐溫 | 0~66℃ |