化工儀器網
資料下載
TCP0020/TCP2020/TCP202A 電流探頭技術資料下載
閱讀：569 發布時間：2022-8-30| 提 供 商 | 東莞市廣聯自動化科技有限公司 | 資料大小 | 328.9KB |
|---|---|---|---|
| 資料圖片 | 下載次數 | 844次 | |
| 資料類型 | PDF 文件 | 瀏覽次數 | 569次 |
| 免費下載 | 點擊下載 |
TCP0020/TCP2020/TCP202A 交流/直流電流探頭產品技術資料下載
Features & Benefits
Easy-to-Use and Accurate AC/DC Current Measurements
DC to >50 MHz Bandwidth
Core Jaw Diameter of 5 mm (0.2 in.)
Accurately Measures Current Levels as Low as 10 mA per Division
High Accuracy with Typically Less than 1% DC Gain Error
Split-core Construction allows Easy Circuit Connection
Low Noise and DC Drift
TCP0020
20 ARMS Maximum Current Capability
100 A Peak Pulse Current Capability
Connects Directly to Oscilloscopes with the TekVPI™ Probe Interface
Provides Automatic Units Scaling and Readout on the Oscilloscope Display
One-button Degauss and AutoZero Control for Ease of Use
Easy Access to Scope-displayed Probe Menu for Probe Setup Control and Operating Status Information
Remote Control Capability through TekVPI Oscilloscope
TCP2020
20 ARMS Maximum Current Capability
100 A Peak Pulse Current Capability
10 mA/mV Sensitivity
BNC Output Connects to Most Oscilloscopes and Other Measurement Equipment (>100 k? Termination Required)
Degauss Button and Thumbwheel for DC Offset Adjustment
Powered by an AC Adapter
TCP202A
15 ADC + Peak AC Maximum Current Capability
50 A Peak Pulse Current Capability
Connects Directly to Oscilloscopes with the TekProbe™ Interface
Provides Automatic Units Scaling and Readout on the Oscilloscope Display
Degauss Button and Thumbwheel for DC Offset Adjustment
Safety Certified
Applications
Power Supplies
Semiconductor Devices
Power Inverter/Converters
Electronic Ballasts
Industrial/Consumer Electronics
Communications
Motor Drives
Transportation Systems
TCP0020, TCP2020, TCP202A
The TCP0020, TCP2020, and TCP202A are a family of high-performance, easy-to-use AC/DC current probes designed for use with a variety of oscilloscopes. The TCP0020 is designed for direct connection to oscilloscopes with the TekVPI™ probe interface and the TCP202A is designed for direct connection to oscilloscopes with the TekProbe™ probe interface. The TCP2020 is designed for use with any instrument with BNC inputs and >100 k? input termination.
These AC/DC current probes provide sufficient performance to support 50 MHz measurement system bandwidth. The TCP0020 and TCP2020 provide a maximum 20 ARMS measurement range, while the TCP202A provides a maximum 15 ADC + Peak AC measurement range. These probes also provide excellent accuracy to current levels as low as 10 mA, important for meeting today’s challenging current measurement needs.