1.本公司檢驗方法符合ISO 9001品質系統和標準要求.
Our test methods are conform with Quality System and the standard of enterprise which confirmed by nation.
2.本公司所出具的數據均可溯源于國家和計量基準.
The data are based on the measurement standard of national and international.
3.本報告未經簽章無效,數據涂改無效.
It well be ineffective without certification ,data alter will be ineffective ,too.
4.客戶可自由使用本報告,但須整份使用,不得任意摘錄.校正結果僅對受校儀器當時之情況負責,受校儀器校正后之準確度,則視往后使用之小心程度及使用之頻率而定.
Customer can use this report freely, but should used whole ,cannot extract willfully. Calibration result are only responsible for the condition of equipment at that moment. Precision of the equipment after calibrate of equipment after calibrate must according to frequency and carefulness degree of use.
5.本次檢驗的技術依據:
Reference documents for the calibration:
ASTMD999、ISTA 1A-2001、EN71
6.本次校正所使用的主要計量標準器具:
Main measure equipment is used in the calibration:
器具名稱/型號 編號 證書號
Name of Equipment Serial No. Certificate No.
激光位移傳感器 XR01060633 LCL20100622
轉速表 DPH33202 GDSB20100326
7.檢驗地點,環境條件:
Inspect place and Environment condition.
地點: 溫度: 相對濕度:
Place: Temperature: RH:
模擬運輸振動試驗機的技術參數：http://www.kshaida17.com/hgtc0808-Products-6849575/
提供商 |
昆山海達精密儀器有限公司 |
下載次數 |
1149次 |
資料大小 |
141.8KB |
資料類型 |
PDF 文件
|
資料圖片 |
點擊查看 |
瀏覽次數 |
3238次 |
15
立即詢價
您提交后，專屬客服將第一時間為您服務