您好, 歡迎來到化工儀器網
計量儀器儀表中英文對照表
計量儀器儀表中英文對照表
61齒輪漸開線樣板the involute master of gear
62齒輪螺旋線樣板the helix master of gear
63矩形花鍵量規gauges for straight–sided splines
64測量蝸桿master worm
65測齒儀universal gear measuring instrument
66漸開線檢查儀universal involute measuring instrument
67齒輪齒距測量儀gear circular pictchmeasuring instrument
68齒輪測量機Universal gear measuring machine
69齒輪螺旋線測量儀gear helix measuring instrument
70便攜式齒輪齒距測量儀manual gear circular pitch measuring instrument
71便攜式齒輪基節測量儀manual gear base pitch measuring instrument
72立式滾刀測量儀vertical hob measuring instrument
73齒輪雙面嚙合綜合測量儀Gear dual-flank measuring instrument
74齒輪單面嚙合整體誤差測量儀Gear single-flank meshing integrated error measuring instrument
75梯形螺紋量規gauges for metric trapezoidal screw threads
76工作螺紋量規work gauges for metric trapezoidal screw threads
77校對螺紋量規check gauges for metric trapezoidal screw threads
78.梯形螺紋量規型式與尺寸Types and dimensions of metric trapezoidal screw threads
79.普通螺紋量規型式與尺寸Types and dimensions of gauges purpose screw threads
80.非螺紋密封的管螺紋量規Gauges for pipe threads prcessure-tight joints are not made on the threads
81.螺紋千分尺Screw thread micrometer
82.zui大允許誤差maximum permissible error
83.間隙螺紋量規Clearance screw gauge
84.量針Bar gauge
85.螺紋樣板Screw thread template
86.用螺紋密封的管螺紋量規Gauges for pipe threads where pressure-tight joints are made on the threads
87.刀具預調測量儀精度Accuracy of the presetting instrument
88.薄膜式氣動量儀Membrane type pneumatic measuring instrument
89.光柵線位移測量系統Grating linear displacement measuring system
90.光柵角位移測量系統Grating angular displacement measuring system
91.磁柵線位移測量系統Magnet-grid linear displacement measuring system
92.量塊附件Accessories for gauge blocks
93.V形架Vee blocks
94.比較儀座Comparator stand
95.磁性表座Magnetic stand
96.表座Universal stand for dial indicator
1.刀口型直尺:knife straigjht edge
2.刀口尺: knife straigjht edge
3.三棱尺three edges straigjht edge
4.四棱尺four edges straigjht edge
5.條式和框式水平儀bar form and square levels
6.合像水平儀imaging level meter
7鑄鐵平板cast iron surface plate
8.巖石平板granite surface plate
9.鑄鐵平尺cast iron straigjht edge
10.鋼平尺和巖石平尺steel and granite straigjht edge
11.圓度儀roundness measuring instrument
12.電子水平儀electronic level meter
13.表面粗糙度比較樣塊鑄造表面roughness comparison specimens cast surface
14.表面粗糙度比較樣塊磨、車、銑、插及刨加工表面roughness comparison specimens-groundturnedboredmilledshape and planed
15.表面粗糙度比較樣塊電火花加工表面roughness comparison specimens spark-erostion machining surfaces
16.表面粗糙度比較樣塊拋光加工表面roughness comparison specimens pollshed surfaces
17.接觸式儀器的標稱特性
18.輪廓profiles
19.軌跡輪廓traced profile
20.基準輪廓reference profile
21.總輪廓total profile
22.原始輪廓primary profile
23.殘余輪廓residual profile
24.觸針式儀器stylus instrument
25.感應位移數字存儲觸針式量儀displacement sensitivedigitally storing stylus instrument
26.觸針式儀器的部件stylus instrument components
27.測量環measurement loop
28.導向基準renfence guide
29.驅動器drive unit
30.測頭（傳感器） probe（pick-up）
31.拾取單元tracing element
32.針尖stylus tip
33.轉換器transducer
34.放大器amplifier
35.模/數轉換器analog-to-digital converter
36.數據輸入data input
37.數據輸出data output
38.輪廓濾波和評定profile filtering and evaluation
39.輪廓記錄器profile recorder
40.儀器的計量特性metrological characteristics of the instrument
41.靜測力的變化change of static measuring force
42.靜態測力static measuring force
43.動態測量力dynamic measuring force
44.滯后hysteresis
45.測頭的測量范圍transmission function for the sine waves
46.儀器的測量范圍measuring range of the instrument
47.模數轉換器的量化步距quantization step of the ADC
48.儀器分辨力instrument resolution
49.量程分辨力比range-to-resolution ratio
50.測頭線性偏差probe linearity deviation
51.短波傳輸界限short-wave transmission limitation
52.輪廓垂直成分傳輸vertical profile component transmission1
53表面粗糙度比較樣塊拋丸、噴砂加工表面roughness comparison specimens shot blasted and blasted surfaces
54產品結構幾何量計術規范（GPS）geometrical product specifications（GPS）
55表面結構surface texture
56接觸式儀器的標稱特性nominal characteristics of contact instruments
57公法線千分尺micrometer for mearsuring root tangent lenghths of gear teeth
58zui大允許誤差maximum permissible error
59圓柱直齒漸開線花鍵量規gauges for straight cylindrical involute splines
60齒厚游標卡尺Gear tooth vernier calipers