您好, 歡迎來到化工儀器網
產品簡介
深圳市三高貿易有限公司*日本思達CEDAR氣動油壓測量儀,CEDAR扭力計，數顯扭力計，進口扭力起子。日本思達牌電子數顯扭力起子廠價直銷！DI-IM-IP500日本思達CEDAR氣動油壓測量儀.
詳細介紹
深圳市三高貿易有限公司*日本思達CEDAR氣動油壓測量儀,CEDAR扭力計，數顯扭力計，進口扭力起子。日本思達牌電子數顯扭力起子廠價直銷！
日本思達CEDAR氣動油壓測量儀,DI-IM-IP500 CEDAR, 進口油壓測量儀
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range （at the time of Track） | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯（499 or less digit亇3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （rightleft） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146（W）亊115（D）亊48（H） 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | 乗 | 乗 | |
| AC/DC adaptor （Please choose AC adaptor out of 120V,230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||
| Specification | 俢俬-侾俵-俬俹俆侽 | 俢俬-侾俵-俬俹俀侽侽 | 俢俬-侾俵-俬俹俆侽侽 | |
| Measuring range （at the time of Track） | 0.30乣50 N 3.0乣500 kgf丒cm 3.0乣430 lbf丒in | 3.0乣200 N 30乣2000 kgf丒cm 30乣1800 lbf丒in | 3.0乣500 N 30乣5000 kgf丒cm 30乣4500 lbf丒in | |
| Peak down Operating range | 0.70N?/span>m乣, 7.0kgf丒cm/ lbf丒in乣 | 7.0N?/span>m乣, 70kgf丒cm/ lbf丒in乣 | ||
| Accuracy | 亇0.5亾乮F/S乯（499 or less digit亇3digit） | |||
| Display | The 4 figures digital display of LED | |||
| The measurement direction | CW-CCW （rightleft） | |||
| Measuring mode | P-P Peak | Peak load value hold | ||
| T-R Track | Indication of real time torque value. | |||
| P-D Peak down | Indication peak down pointhold. | |||
| Display zero clearance | Automatically clear the displayed value after certain time （0.5 - 3.0 sec,selectable at each 0.5 sec）. Setting 0.0 sec for manual Zero clearance | |||
| Blow | Measurement range | Zero to 99 blow | ||
| Measurement time | 0.1 - 9.9 seconds | |||
| Data output | RS232C conformity （baud rate 9600） | |||
| Power supply | Ni-Cd chargeable battery 1.2V亊5cells 700mAh | |||
| Auto power save | 5 minutes no use, automatically switch off. | |||
| Charging time | From empty - less than 6hours | |||
| Continunous working time | 8 hours | |||
| Meter part丂Weight | About 600g | |||
| Detection part丂Weight | about 600g | about 1kg | about 2.5kg | |
| Meter part丂Outside size | 146（W）亊115（D）亊48（H） 乮It does not contain by the projection part乯 | |||
| Code length | Standard 1m （there are automatic machines no less than 4m as an option.） | |||
| Accessories （one piece each） | Attache case | 乗 | 乗 | |
| AC/DC adaptor （Please choose AC adaptor out of 120V,230V.） | ||||
| An inspection report, a proofreading certificate, traceability system figure | ||||